How to effectively isolate the noise generated by the linear guide rail? Because the machinery will inevitably produce very uncomfortable noise in the production and operation, if the noise is reckless for a long time, it will form noise pollution; in the face of noise, we can only let it continue to produce, however, after a long period of months, the guide rail screw manufacturers have summed up how to effectively block the noise?

　　我們常規控制噪聲污染的原則是:的原則治理噪聲之前到達耳膜,減震、隔音、吸音、布局和建設等措施,來降低聲源的振動,吸收聲能的傳播,或壁壘保持良好的全部或部分,以達到降噪的效果。機械噪聲隔離，請參考以下方法:

　　The principle of our routine control of noise pollution is as follows: before the control of noise, measures such as reaching the eardrum, shock absorption, sound insulation, sound absorption, layout and construction will be taken to reduce the vibration of the sound source, absorb the spread of sound energy, or keep a good part or all of the barriers, so as to achieve the effect of noise reduction. For mechanical noise isolation, please refer to the following methods:

　　(1)傳輸路徑降噪

　　(1) Transmission path noise reduction

　　(2)減少噪聲源

　　(2) Reduce noise sources

　　(3)受音器或者器官的噪聲保護

　　(3) Noise protection of receivers or organs

　　(4)減少傳播路徑中的噪聲，控制噪聲傳播，改變噪聲源已經發出的噪聲傳播路徑，如采取吸聲、隔聲、隔聲、隔振等措施，以及合理規劃城市和建筑布局。

　　(4) Reduce the noise in the propagation path, control the noise propagation, change the noise propagation path that the noise source has sent out, such as taking measures of sound absorption, sound insulation, sound insulation, vibration isolation, etc., and reasonably plan the urban and architectural layout.

　　(5)為減少噪聲源，工業和交通運輸可以選擇低噪聲的生產設備，改進生產工藝，或改變噪聲源的運動方式(如阻尼、隔振等措施，以減少固體聲音的振動)。

　　(5) In order to reduce noise sources, industry and transportation can choose low-noise production equipment, improve production technology, or change the movement mode of noise sources (such as damping, vibration isolation and other measures to reduce the vibration of solid sound).

　　(6)噪音保護聲音接收器或聲音的器官,如果不能采取措施在聲源和傳播路線,或者如果聲學措施仍不能達到預期的效果,有必要對聲音接收機采取保護措施或聲音的器官,如戴耳塞、耳罩或首飾工人暴露于長期職業噪聲

　　(6) Noise protection sound receivers or organs of sound, if measures cannot be taken at the sound source and transmission route, or if the acoustic measures still fail to achieve the expected effect, it is necessary to take protective measures or organs of sound for sound receivers, such as earplugs, earmuffs or jewelry workers exposed to long-term occupational noise

　　然而,我們想要解決線性導軌的噪音我們建議我們可以開始從線性導軌的光滑油:(1)沒有和單向滾針軸承相同的操作,盡可能延遲保護時期,縮短停機時間,提高勞動生產率。(2)在dn > 5×105高速運行時，應保證電機溫升低，不甩油，以降低功耗，保護電機。(3)其純量含量控制在一定的范圍內，更大限度的降低設備噪聲對鋁合金鑄件的污染。(4)在超低溫工作的前提下，保證單向滾針軸承的啟動和運行的智能化。單向滾針軸承常見問題。保證更小輸出功率。

　　However, if we want to solve the noise of linear guide rail, we suggest that we can start from the smooth oil of linear guide rail: (1) without the same operation as one-way needle roller bearing, delay the protection period as much as possible, shorten the downtime and improve the labor productivity. (2) When DN > 5 × 105 is running at high speed, it should be ensured that the temperature rise of the motor is low and the oil is not shed, so as to reduce the power consumption and protect the motor. (3) Its pure content is controlled in a certain range to minimize the pollution of equipment noise on aluminum alloy castings. (4) Under the premise of ultra-low temperature operation, the intelligent start-up and operation of one-way needle roller bearing is guaranteed. Common problems of one-way needle bearing. Ensure the minimum output power.

　　以上是導軌絲杠廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.zsdress.com

　　The above content is introduced by the guide screw manufacturer. For more information, please visit the website: http://www.jgongrun.com